My Cisco CCNA Exam Experience- From SPOTO’s Student
Today, I passed the CCNA certification exam with 972. The exam time is 2 hours. I spent a total of 39 minutes to answer all the questions, and each topic was carefully read. I spent time on the test topic. This is also to tell everyone. The exam time is not a problem, so please friends on CISCO Road, don't worry about time. The score is not very high, the transcript says that I made a mistake in the configuration topic and the selected topic.
More info can be found in SPOTO WHATSAPP Study Group.
1: Reference Books: Electronic Industry Press: CCNA Study Guide (Chinese 6th Edition) 640-802, I read this book twice, all the experimental topics in this book, all the English questions after class Finished. If you really take the CISCO route first, the foundation must be good at the beginning. I attended the training of senior network engineers for more than 10 months, and I have laid the foundation for a rookie study.
2: Exam reference question bank: Test Passport (v18.01). today, i take the exam, and there are 44 questions, 2 experimental configuration questions, 2 questions in the experiment view, 2 questions in the drag and drop. the other are the selection questions. Only one topic for all topics is not in V18, and all four experiments are covered. I think that if you only read books and do not do the test bank, it is still difficult to pass the test.
The exam should be a bit nervous at the beginning, so you should be sure to check the exam location one day in advance when you take the exam. In addition, when applying for the CCNA exam online, be careful not to apply for Chinese. Be sure to check the email to confirm the exam. When you are in the exam, if you are nervous, you can do the problem slowly. Don't rush to do it. Be sure to believe in yourself. I believe that using the Test Passport question bank is no problem. At the same time, you can breathe a few times and you can alleviate it. Do this, I believe you will not be nervous. In addition, when making a configuration problem with a small problem, be sure to remember to answer all questions and press NEXT.
Usually, do not understand the problem in the topic or English words must be repeatedly scrutinized to find relevant information. The question bank is no problem. In addition, when making a configuration problem with a small problem, be sure to remember to answer all questions and press NEXT. When you are doing a problem, you will encounter problems that you don’t understand or English words must be repeatedly scrutinized to find relevant information. The drag-and-drop problem in the question bank is when you can't see the problem, so when you have the problem, you can start the drag-and-drop option. So when you do the question bank, if you don't see the problem, you must thoroughly understand each option. the meaning of. In the end, I didn't even look at the question and only chose one. Fortunately, when I pressed NEXT, I was prompted to choose only 2, which is fortunate.
I have encountered 44 questions in the exam. I encountered a completely different topic of EGRIP. This topic is actually the same. The topic gives the EGRIP configuration of multiple subnets, but because NO AUTO-SUMMARY is not used, Will appear in the boundary summary. This answer is also this, it should be a class summary for the boundary, only host A can not CONSOLE host B.
3. Experimental topic: The first topic: RIP configuration topic, the first screen appears a prompt, then the bottom left corner of the screen has "" "configuration instructions" and "TOPOLOGY", the configuration instructions will give the requirements to configure RIP, click TOPOLOGY, will jump out of the topology map, click on the "CONSOLE" computer of the linked router, CLI will appear, command line.
Anyway, thanks SPOTO. With SPOTO’s help, I can pass the exam easily and fast.